Vibramat is specifically designed to be used under tiles and timber floors in high rise buildings for the purpose of reducing footfall and impact noises. Vibramat absorbs as much impact noise as possible before allowing energy to reach the structure of the building.
The raw materials used in making Vibramat come from either recycling old tyres, collecting waste rubber in the form of off-cuts from shoe factories etc etc.
Vibramat comes in flat sheets of 1.1m x 1.1m for much easier installation compared to rolled underlay. Standard thicknesses are 3mm, 4mm, 5mm in the 100% rubber type. Each sheet covers approximately 1.21m2.
Size: 3 mm, 4 mm, 5 mm
Splitz Pins are just what you need to pin your plywood to your builder plastics to prevent mositure from affecting your flooring. Available in boxes of 100.
Size: 38 mm, 50 mm, 65 mm
Our Hardwood Plywood is an engineered panel ideal for the underlay of solid timber flooring.
2440 x 1220 x 12 mm, 2440 x 1220 x 15 mm, 2440 x 1220 x 18 mm, 2440 x 1220 x 19 mm, 2440 x 1220 x 4 mm, 2440 x 1220 x 9 mm, 2440x1220x7 mm, 2700 x 900 x 4 mm
Film Face, Hardwood
Ready-to-use polyurethane one-component, solvent-free, elastic adhesive for all types of wooden flooring. Available in sausages which approximately cover 1m2 each depending on the condition of the sub floor.
One-component, solvent-free, sililated polymer adhesive with very low emission level of volatile organic compounds, for all types of parquet. Available in drums which approximately cover 17m2 depending on the condition of the sub floor.
Our F17 Klin Dried Hardwood (KDHW) is already Kiln Dried to be able to withstand Australia’s harsh environment, making it a perfect timber selection for both construction and decking framing. All sizes available.
Greenhill Timbers’ Laminated Veneer Lumber (LVL) are a high quality engineered timber designed with strength in mind, in particular to use in structural construction. All sizes are available.
Our Machine Graded Pine (MGP10) is available in all sizes and is perfect for wall framing in Residential and Commercial Construction. Each piece is ensured to match design standards of MGP10 so quality is guaranteed.
Greenhill Timbers’ supply quality Fence Extension, designed to increase the height of your fence to keep your privacy. A great alternative over our Merbau Screening, to match your existing fence.
Spotted Gum [Corymbia Maculata) is a hardwood species with a distinguished soft mottled color caused by weathering of the outer tree as it sheds elliptical strips of bark, which is how it gets called ‘spotted’. It ranges from pale grey browns through to soft creams to a rich brown chocolate. It has a hard density, with a frequent wavy grain creating a beautiful fiddle back effect.
Prefab Stairs is Australia’a leading manufacturer of external timber stairs. The stair steps comes in various sizes and are easy to install. Prefab Stairs are available in Treated Pine and Merbau. For more information visit the Prefab Stairs website at http://www.prefabstairs.com.au/index.html or call us on (03) 9465 9875. Read More
Australian Eucalyptus is an Australian alternative to Merbau or Spotted Gum. Australian Eucalyptus is a mixed species that contains many Australian timber species including Spotted Gum, Tallowwood, Red Gum and Blackbutt. Available only in 5.7 Finger joint Laminate (FJL) pieces it’s perfect for your screening or fencing, you can’t go wrong. Read More